Project 7: IBU Prototype Part (1)

Project 7: IBU Prototype Part (1)
24th August 2010
0900-1200

Today, we have to do a big dome using the bamboo. This is a very heavy project but all of us only make the component of the dome. Firstly, female was giving the chance to choose first whether want to make one or two components of the bamboo and then continue with the male.

After that, Dr. Wan was giving the explanation. We were told to choose 75mm diameter of bamboo in the Taman Rekreasi USM, other than that was not acceptable. We also had been told that every part of the dome has their own measurement and we had to know what our section is and which part we are having.

Around 5 o'clock in the evening, we gather at Tekun guard house.

Around 5 minutes, we reach the Taman Rekereasi and found the bamboo.
We were discussing the length of the bamboo that we have to cut.
We started to cut the bamboo.

It was very hard to cut the bamboo and we were still cut the first bamboo.

Still in the process.

I was continuing with another bamboo.

I was finishing cut the bamboo.
I was moving my bamboo at one side with my friend.

Finally, we finished cut the bamboo and prepared went back.

We went back around 7 o'clock in the evening.